Our brand has extended the boundaries of ceramic tiles: formats, colours, surfaces and textures feature an advanced concentration of style and design.
The best production technologies allow us to prepare a wide range of floorings and facings that reflect an extremely contemporary attitude, ideal for all uses, even the most uncommon. The materials used for our solutions are original and refined: single firing, double firing, glazed porcelain and full body porcelain stoneware.

The surfaces feature extremely captivating tactile and material effects in classic, elegant or rustic styles. The finishes, with their myriad aesthetic possibilities, meet and fulfil any technical requirement: natural, gloss polished, satin polished, pre-polished, lapped, vitrified, structured, structured ribbed, bush-hammered and satin finish rustic.

The colours and formats are also available in multiple options. Each collection allows for the creation of infinite modular combinations and inventive arrangements to achieve any design and architectonic concept.


Porcelain stoneware tiles are produced with selected and particularly pure raw materials, subject to the latest extraction and control technologies. The resulting tiles are extremely high quality porcelain stoneware obtained through wet grinding the raw materials, partial drying with atomization and storage in silo to homogenise the specifications, pressing with high power hydraulic presses to achieve specific pressures above 500 Kg/cm2.

The considerable pressing force achieves, after firing at about 1200°C, an extremely compact and resistant tile with very low water absorption, lower than 0.1% (UNI EN ISO 10545-3) and a very high material strength to deep abrasion, less than 140 mm³ of material removed, compared to 175 mm³ required by Standard UNI EN ISO 10545-6.


Double firing uses clays from owned quarries and chamotte, dry-ground, mixed and pressed with hydraulic presses. The firing of the support is performed in quick cycle with roller ovens at a temperature of about 1100°. After the glazing of the biscuit the glaze is fired in single layer roller ovens at about 1030°.

The resulting facing materials have a tensile strength on average higher than 17N/mm2 according to UNI EN ISO 10545-4 and with water absorption higher than 10%, classified as BIII according to standard UNI EN 14411.

These types of tiles have practically no shrinkage during firing, and this dimensional consistency results in a very easy to lay product and the production of large formats is completely ground.


French NF-UPEC certification
French NF-UPEC product certification certifies that the product complies with the technical requirements stipulated in the relevant French standard.

Product safety
Our tiles are produced using carefully selected, pure raw materials that are subject to the most modern checking and extraction processes. After being treated at temperatures of over 1200°C, these materials are then pressed with an intense force to create a highly compact and resistant ceramic body with low water absorption. When the ceramic surfaces of these tiles are subject to wear, the material that is lost is in no way harmful. Any material that is detached is completely inert at a toxicological level and has no impact on the environment whatsoever. The ceramic slab tiles are completely fire resistant, so they do not risk being damaged if exposed to naked flames.


The maintenance of our products depends, obviously, on the type of use. When used in raised floorings avoid using water or excessive vapour and use damp and squeezed cloths to protect any systems under the flooring level.

In case of facings on ventilated walls avoid using violent jets of water, to avoid damaging the insulation behind the tile face that must be perfectly dry to function optimally.

The maintenance of materials laid with adhesive differs from cleaning when the laying is completed and extraordinary or routine interventions. For the former we recommend acid-based products, after having soaked the tiles to avoid damaging the joints with the acid solution. For the latter we recommend normal neutral or basic degreasing detergents that can easily be found in commerce.


Our tiles are produced with selected and particularly pure raw materials that are subject to the most modern extraction and control technologies. The high pressing force achieves, after heat treatment at over 1200°, a highly compact and resistant tile with an extremely low water absorption. The tile surface may, during normal wear, release some material that is not in any way harmful. Any material removed is absolutely inert from a toxicological point of view and is not harmful for the environment.

Our ceramic tiles are not affected by fire. They are not damaged from being exposed to flames and they limit the spreading and intensification of the flames. The ceramic tiles do not allow the proliferation of bacteria and they are ideal for locations where the sterility conditions must be easily maintained. All waste material from the industrial production is inert and does not constitute a reactivity or resistance hazard from a chemical and thermal point of view. The waste can be disposed of in the environment without any risk or it can be reused to prepare other material (substrates, etc.).